EasyManua.ls Logo

QUANTA LB4M - IGMP Snooping Querier; Show Commands

QUANTA LB4M
970 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 130/970
were connected to the same layer 2 LAN port but were still interested in receiving multicast
traffic directed to that group. Also, fast-leave processing is supported only with IGMP version 2
hosts.
Syntax
set igmp fast-leave <1-3965>
no set igmp fast-leave <1-3965>
<1-3965> - VLAN ID (Range: 1 – 3965).
no - This command disables IGMP Snooping fast-leave admin mode on a selected VLAN.
Default Setting
None
Command Mode
Vlan Database
6.2.7 IGMP Snooping Querier
6.2.7.1 Show Commands
6.2.7.1.1. Display IGMP snooping querier global info
This command display IGMP snooping querier global information on the system.
Syntax
show ip igmp snooping querier
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message

Table of Contents

Related product manuals