QUANTA LB4M User Manual

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 579/970
Display Messages
Interface Valid slot and port number separated by forward slashes.
OSPF Admin Mode States whether OSPF is enabled or disabled on a router interface. This
is a configured value.
OSPF Area ID Represents the OSPF Area Id for the specified interface. This is a configured
value.
Router Priority Shows the router priority. The router priority determines which router is the
designated router.
Hello Interval Shows the frequency, in seconds, at which the interface sends Hello packets.
Dead Interval Shows the amount of time, in seconds, the interface waits before assuming a
neighbor is down.
Retransmit Interval Shows the frequency, in seconds, at which the interface sends LSA.
Retransmit Delay Interval Shows the number of seconds the interface adds to the age of
LSA packets before transmission.
LSA Ack Interval Shows the amount of time, in seconds, the interface waits before sending
an LSA acknowledgement after receiving an LSA.
9.4.1.9 show ipv6 ospf interface stats
This command displays the statistics for a specific interface. The command only displays
information if OSPF is enabled
Syntax
show ipv6 ospf interface stats <slot/port>
<slot/port> - Interface number.
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Messages
OSPFv3 Area ID The area id of this OSPF interface.
IP Address The IP address associated with this OSPF interface.
OSPFv3 Interface Events The number of times the specified OSPF interface has changed
its state, or an error has occurred.
Virtual Events The number of state changes or errors that occurred on this virtual link.
Neighbor Events The number of times this neighbor relationship has changed state, or an
error has occurred.
Packets Received The number of OSPFv3 packets received on the interface.
Packets Transmitted The number of OSPFv3 packets sent on the interface.
LSAs Sent The total number of LSAs flooded on the interface.
LSA Acks Received The total number of LSA acknowledged from this interface.
LSA Acks Sent The total number of LSAs acknowledged to this interface.

QUANTA LB4M Specifications

General

Brand	QUANTA
Model	LB4M
Category	Switch
Language	English