QUANTA LB4M - Denial of Service Commands; Show Commands; Show Dos-Control

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 325/970
network-policy Transmit the LLDP network policy TLV.
Default Setting
None
Command Mode
Global Config
6.13 Denial Of Service Commands
6.13.1 Show Commands
6.13.1.1 show dos-control
This command displays the Denial of Service configurations for the entire system.
Syntax
show dos-control
Default Setting
None
Command Mode
Privileged Exec
Display Message
SIPDIP Mode: May be enabled or disabled. The factory default is disabled.
First Fragment Mode: May be enabled or disabled. The factory default is disabled.
Min TCP Hdr Size: range <0-255> the factory default is 20.
TCP Fragment Mode: May be enabled or disabled. The factory default is disabled.
TCP Flag Mode: May be enabled or disabled. The factory default is disabled.
L4 Port Mode: May be enabled or disabled. The factory default is disabled.
ICMP Mode: May be enabled or disabled. The factory default is disabled.
Max ICMP Pkt Size: range <0-1023> the factory default is 512.
Max ICMPV6 Pkt Size: range <0-1023> the factory default is 512.