Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 375/970
Class-Map Config
6.18.2.16 match secondary-cos
This command adds to the specified class definition a match condition for the secondary Class
of Service value (the inner 802.1Q tag of a double VLAN tagged packet). The value may be
from 0 to 7.
NOTE: This command is not available on the Broadcom 5630x platform.
Syntax
match secondary-cos <0-7>
Default Setting
None
Command Mode
Class-Map Config
6.18.2.17 match secondary-vlan
This command adds to the specified class definition a match condition based on the value of
the layer 2 secondary VLAN Identifier field (the inner 802.1Q tag of a double VLAN tagged
packet). The secondary VLAN ID is an integer from 1 to 4095.
NOTE: This command is not available on the Broadcom 5630x platform.
Syntax
To Next Page
Loading...
Need help?
General
