Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 257/970
802.1x: This field displays the authentication login list assigned to the user for 802.1x port
security.
6.8.1.2 show authentication
This command displays the ordered authentication methods for all authentication login lists.
Syntax
show authentication
Default Setting
None
Command Mode
Privileged Exec
Display Message
Authentication Login List: This displays the authentication login listname.
Method 1: This displays the first method in the specified authentication login list, if any.
Method 2: This displays the second method in the specified authentication login list, if any.
Method 3: This displays the third method in the specified authentication login list, if any.
6.8.1.3 show authentication users
This command displays information about the users assigned to the specified authentication
login list. If the login is assigned to non-configured users, the user “default” will appear in the
user column.
Syntax
show authentication users <listname>
<listname> - the authentication login listname.
Default Setting
None
To Next Page
Loading...
Need help?
General
