QUANTA LB4M - Maxsessions; Password-Threshold; Terminal Length

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 183/970
6.3.3.5 password-threshold
This command is used to set the password instruction threshold limited for the number of failed
login attempts.
Syntax
password-threshold <0-120>
no password-threshold
<threshold> - max threshold (Range: 0 - 120).
no - This command sets the maximum value to the default.
Default Setting
3
Command Mode
Telnet Config
6.3.3.6 terminal length
This command uses to configure the columns per page for the vty session.
Syntax
terminal-length <10-100>
<10-100> - Columns per page (Range: 10 - 100).
no - This command sets the value to the default.
Default Setting
24
Command Mode
Telnet Config
6.3.3.7 maxsessions