Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 309/970
None
Command Mode
Privileged Exec
Display Message
Interface: Shows the interface in a slot/port format.
Link: Shows whether the link is up or down.
Transmit: Shows whether the interface transmits LLDPDUs.
Receive: Shows whether the interface receives LLDPDUs.
Notify: Shows whether the interface sends remote data change notifications.
TLVs: Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes
can be 0 (Port Description), 1 (System Name), 2 (System Description), or 3 (System
Capability).
Mgmt: Shows whether the interface transmits system management address information in
the LLDPDUs.
6.12.1.3 show lldp statistics
This command uses to display the current LLDP traffic and remote table statistics for a specific
interface or for all interfaces.
Syntax
show lldp statistics {<slot/port> | all}
<slot/port> - Configs a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Last Update: Shows the amount of time since the last update to the remote table in days,
hours, minutes, and seconds.
Total Inserts: Total number of inserts to the remote data table.
Total Deletes: Total number of deletes from the remote data table.
Total Drops: Total number of times the complete remote data received was not inserted due
to insufficient resources.
Total Ageouts: Total number of times a complete remote data entry was deleted because
the Time to Live interval expired.
To Next Page
Loading...
Need help?
General
