QUANTA LB4M User Manual

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 157/970
Syntax
adminmode
no adminmode
no - This command disables a configured port-channel (LAG).
Default Setting
Enabled
Command Mode
Interface Config
6.2.10.9 lacp
This command enables Link Aggregation Control Protocol (LACP) on a port.
Syntax
lacp
no lacp
no - This command disables Link Aggregation Control Protocol (LACP) on a port.
Default Setting
Enabled
Command Mode
Interface Config
This command enables Link Aggregation Control Protocol (LACP) on all ports.
Syntax

QUANTA LB4M Specifications

General

Brand	QUANTA
Model	LB4M
Category	Switch
Language	English