Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 433/970
7.2.2.7 ip forwarding
This command enables forwarding of IP frames.
Syntax
ip forwarding
no ip forwarding
no - Disable forwarding of IP frames.
Default Setting
Enabled
Command Mode
Global Config
7.2.2.8 ip directed-broadcast
This command enables the forwarding of network-directed broadcasts. When enabled, network
directed broadcasts are forwarded. When disabled they are dropped.
Syntax
ip directed-broadcast
no ip directed-broadcast
no - Drop network directed broadcast packets.
Default Setting
Enabled
Command Mode
Interface Config
7.2.2.9 ip mtu
This command sets the IP Maximum Transmission Unit (MTU) on a routing interface. The IP
MTU is the size of the largest IP packet that can be transmitted on the interface without
fragmentation.
To Next Page
Loading...
Need help?
General
