Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 610/970
9.6.1.3 show ipv6 dhcp interface
This command displays DHCPv6 information for all relevant interfaces or the specified
interface. If you specify an interface, you can use the optional statistics
parameter to view
statistics for the specified interface.
Syntax
show ipv6 dhcp interface <slot/port> [statistics]
Default Setting
None
Command Mode
Privileged Exec
Display Message
DHCPv6 is Enabled (Disabled) Shows the status of the DHCPv6 server.
Server DUID: If configured, shows the DHCPv6 unique identifier
IPv6 Interface Shows the interface name in
<slot/port>
format.
Mode Shows whether the interface is a IPv6 DHCP relay or server.
If the interface mode is server, the following information displays.
Pool Name Shows the pool name specifying information for DHCPv6 server distribution to
DHCPv6 clients.
Server Preference Shows the preference of the server.
Option Flags Shows whether rapid commit is enabled.
If the interface mode is relay, the following information displays.
Relay Address Shows the IPv6 address of the relay server.
Relay Interface Number Shows the relay server interface in
<slot/port>
format.
Relay Remote ID If configured, shows the name of the relay remote.
Option Flags Shows whether rapid commit is configured.
9.6.1.4 show ipv6 dhcp pool
This command displays configured DHCPv6 pool.
Syntax
To Next Page
Loading...
Need help?
General
