Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 594/970
9.4.2.20 area stub (OSPFv3)
This command creates a stub area for the specified area ID. A stub area is characterized by
the fact that AS External LSAs are not propagated into the area. Removing AS External LSAs
and Summary LSAs can significantly reduce the link state database of routers within the stub
area.
Syntax
area <areaid> stub
no area <areaid> stub
<areaid> - Area ID.
<no> - This command deletes a stub area for the specified area ID.
Default Setting
None
Command Mode
Router OSPFv3 Config
9.4.2.21 area stub no-summary (OSPFv3)
This command disables
the import of Sum
mary LSAs
for the stub area identi
fied by <areaid>.
Syntax
area <areaid> stub no-summary
no area <areaid> stub no-summary
<areaid> - Area ID.
<no> - This command sets the Summary LSA import mode to the default for the stub area
identified by <areaid>.
Default Setting
Enabled
Command Mode
Router OSPFv3 Config
To Next Page
Loading...
Need help?
General
