Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 872/970
11.2.5.6 Viewing IPv6 Static Neighbor Table Information Page
Configurable Data
IPv6 Address - Specifies the IPv6 address of neighbor.
MAC Address - Specifies the IPv6 address of neighbor.
Non-Configurable Data
IPv6 Address - Display the IPv6 address of current IPv6 neighbor table.
MAC Address - Display the MAC address of current IPv6 neighbor table.
Command Buttons
Add - Add the IPv6 neighbor.
Delete - Delete the IPv6 neighbor.
Refresh - Refreshes the screen with most recent data.
11.2.5.7 Managing DHCPv6 Protocol
11.2.5.7.1. Configuring DHCPv6 Gobal Configuration Page
Configurable Data
DHCPv6 Mode - Specifies DHCPv6 operation on the switch. Value is enabled or disabled.
Relay option - Specifies Relay Agent Information Option value. The values allowed are
between 32 to 65535. The default value is 32.
Remote-id Sub-option- Specifies the Relay Agent Information Option Remote-ID
Sub-option type value. The values allowed are between 1 and 65535. The default value is
1.
To Next Page
Loading...
Need help?
General
