QUANTA LB4M User Manual

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 42/970
up or down
Link Trap - Determines whether or not to
send a trap when link status changes
LACP Mode - Displays whether LACP is
enabled or disabled on this port
Flow Mode - Indicates the status of flow
control on this port
Cap. Status - Indicates the port
capabilities during auto-negotiation
2.5.3 Quick Start up User Account Management
Table 2-3. Quick Start up User Account Management
Command Details
show users
Displays all users that are allowed to
access the switch
User Access Mode - Shows whether the
user is able to change parameters on the
switch (Read/Write) or is only able to view
(Read Only).
As a factory default, admin has
Read/Write access and guest has Read
Only access. There can only be one
Read/Write user and up to 5 Read Only
users.
show loginsession
Displays all login session information
username <username> {passwd |
nopasswd}
Allows the user to set passwords or
change passwords needed to login
A prompt will appear after the command is
entered requesting the old password. In
the absence of an old password
leave the
area blank. The operator must press enter
to execute the command.
The system then prompts the user for a
new password then a prompt to confirm
the new password. If the new password
and the confirmed password match a
message will be displayed.
The user password should not be more

QUANTA LB4M Specifications

General

Brand	QUANTA
Model	LB4M
Category	Switch
Language	English