QUANTA LB4M - Radius-Server Retransmit

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 283/970
Syntax
radius-server key {acct | auth} <ipaddr> {<key-string>|encrypted <password>}
<ipaddr> - is a IP address.
<key-string> - radius key string.
<password> is the password in encrypted format.
Default Setting
None
Command Mode
Global Config
6.8.4.6 radius-server retransmit
This command sets the maximum number of times a request packet is re-transmitted when no
response is received from the RADIUS server. The retries value is an integer in the range of 1
to 15.
Syntax
radius-server retransmit <retries>
no radius-server retransmit
<retries> - the maximum number of times (Range: 1 - 15).
no - This command sets the maximum number of times a request packet is re-transmitted,
when no response is received from the RADIUS server, to the default value, that is, 10.
Default Setting
10
Command Mode
Global Config