QUANTA LB4M - Port-Channel Linktrap; Port-Channel Load-Balance

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 154/970
no - This command disables to support static function on specific port-channel on this
device.
Default Setting
Disabled
Command Mode
Interface Config
6.2.10.5 port-channel linktrap
This command enables link trap notifications for the port-channel (LAG). The interface is a
logical slot and port for a configured port-channel. The option all sets every configured
port-channel with the same administrative mode setting.
Syntax
port-channel linktrap {<logical slot/port> | all}
no port-channel linktrap {<logical slot/port> | all}
<logical slot/port> - Port-Channel Interface number.
all - all Port-Channel interfaces.
no - This command disables link trap notifications for the port-channel (LAG). The
interface is a logical slot and port for a configured port-channel. The option all sets every
configured port-channel with the same administrative mode setting.
Default Setting
Enabled
Command Mode
Global Config
6.2.10.6 port-channel load-balance
This command for CLI will configured the mode of load balance on the all Port Channels. The
parameter “
src-mac | dst-mac | dst-src-mac | src-ip | dst-ip| dst-src-ip ” represent the mode