QUANTA LB4M - Configuration Commands; Clear Hosts; Ip Hosts

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 474/970
7.5.2 Configuration Commands
7.5.2.1 ip hosts
This command creates a static entry in the DNS table that maps a host name to an IP address.
Syntax
ip host <name> <ipaddr>
no ip host <name>
<name> - Host name.
<ipaddr> - IP address of the host.
<no> - Remove the corresponding name to IP address mapping entry.
Default Setting
None
Command Mode
Global Mode
7.5.2.2 clear hosts
This command clears the entire static host name-to-address mapping table.
Syntax
clear hosts
Default Setting
None
Command Mode