Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 323/970
inventory Transmit the LLDP inventory TLV.
location Transmit the LLDP location TLV.
network-policy Transmit the LLDP network policy TLV.
Default Setting
None
Command Mode
Interface Config
6.12.2.11 lldp med all
The user can go to the CLI Global Configuration Mode to set LLDP-MED on all the ports, use
the lldp med all Global configuration command. Use the no lldp med all to disable LLDP-MED
on all the ports.
Syntax
lldp med all
no lldp med all
Default Setting
Disable
Command Mode
Global config
6.12.2.12 lldp med confignotification all
The user can go to the CLI Global Configuration Mode to set all the ports to send the topology
change notification, use the
lldp med confignotification all
Global configuration command. Use
the no
lldp med confignotification all
to remove all the ports to send the topology change
notification.
Syntax