Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 486/970
distribute-list <1-199> out {ospf | static | connected}
no distribute-list <1-199> out {ospf | static | connected}
<1 - 199> - Access List ID value. The Access List filters the routes to be redistributed by
the source protocol.
no - This command is used to cancel the access list to filter routes received from the
source protocol.
Default Setting
0
Command Mode
Router RIP Config
7.6.2.10 redistribute
This command configures RIP protocol to redistribute routes from the specified source
protocol/routers. There are five possible match options. When you submit the command
redistribute ospf match <matchtype> the match-type or types specified are added to any match
types presently being redistributed. Internal routes are redistributed by default. Source
protocols have OSPF, Static, and Connetced. Match types will have internal, external 1,
external 2, nssa-external 1, and nssa-external 2.
Syntax
Format for OSPF as source protocol:
redistribute ospf [metric <1-15>] [match [internal] [external 1] [external 2
[nssa-external 1] [nssa-external 2]]
Format for other source protocols:
redistribute {static | connected} [metric <1-15>]
[external 2] [nssa-external 1] [nssa-external 2]]
<1 - 15> - a value for metric.
no - This command de-configures RIP protocol to redistribute routes from the specified
source protocol/routers.
Default Setting
To Next Page
Loading...
Need help?
General
