QUANTA LB4M User Manual

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 136/970
6.2.8.1 Show Commands
6.2.8.1.1. show ipv6 mld snooping
The user can go to the CLI Privilege Mode to get all of mld snooping information, use the show
ip mld snooping Privilege command.
Syntax
show ipv6 mld snooping [<slot/port>|<vlan-id>]
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
When the optional arguments <slot/port> or <vlanid> are not used, the command displays
the following information.
Admin Mode
Indicates whether or not MLD Snooping is active on the switch
Interfaces Enabled
for MLD Snooping
Interfaces on which MLD Snooping is enabled.
MLD Control Frame
Count
Displays the number of MLD Control frames that are processed
by the CPU
VLANs Enabled for
MLD Snooping
VLANs on which MLD Snooping is enabled
When you specify the <slot/port> values, the following information displays.
MLD Snooping
Admin Mode
Indicates whether MLD Snooping is active on the interface.
Fast Leave Mode
Indicates whether MLD Snooping Fast Leave is active on the
interface.
Group Membership
Interval
Shows the amount of time in seconds that a switch will wait for a
report from a particular group on a particular interface, which is
participating on the interface, before deleting the interface from
the entry. This value may be configured.
Max Response Time
Interface on which MLD Snooping is enabled
Multicast Router
Present Expiration
Time
Displays the amount of time to wait before removing an interface
that is participating on the interface from the list of interfaces with
multicast routers attached. The interface is removed if a query is

QUANTA LB4M Specifications

General

Brand	QUANTA
Model	LB4M
Category	Switch
Language	English