Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 190/970
<name> - Range is from 1 to 31 alphanumeric characters.
Default Setting
None
Command Mode
Global Config
6.3.4.4 snmp-server location
This command sets the physical location of the switch. The range for name is from 1 to 31
alphanumeric characters.
Syntax
snmp-server location <loc>
<loc> - range is from 1 to 31 alphanumeric characters.
Default Setting
None
Command Mode
Global Config
6.3.4.5 snmp-server contact
This command sets the organization responsible for the network. The range for contact is from
1 to 31 alphanumeric characters.
Syntax