QUANTA LB4M - Script Management Commands; Script Apply; Script Delete

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 248/970
Default Setting
None
Command Mode
Privileged Exec
6.6 Script Management Commands
6.6.1 script apply
This command applies the commands in the configuration script to the switch. The apply
command backs up the running configuration and then starts applying the commands in the
script file. Application of the commands stops at the first failure of a command.
Syntax
script apply <scriptname>
<scriptname> - The name of the script to be applied.
Default Setting
None
Command Mode
Privileged Exec
6.6.2 script delete
This command deletes a specified script or all the scripts presented in the switch.
Syntax
script delete {<scriptname> | all}