Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 556/970
9.3.1.2 show ipv6 interface
This command displays the usability status of IPv6 interfaces.
Syntax
show ipv6 interface {brief | <slot/port> [prefix]}
<slot/port> - Valid slot and port number separated by forward slashes.
Default Setting
None
Command Mode
Privileged Exec
Display Message
If you use the brief parameter, the following information displays for all configured
IPv6
interfaces:
Interface Shows the interface in slot/port format.
IPv6 Routing Operational Mode Shows whether the mode is enabled or disabled.
IPv6 Address/Length Shows the IPv6 address and length on interfaces with IPv6
enabled. If you specify an interface, the following information also appears.
IPv6 is enabled Appears if IPv6 is enabled on the interface.
Routing Mode Shows whether IPv6 routing is enabled or disabled.
Administrative Mode Shows whether the interface administrative mode is enabled or
disabled.
Interface Maximum Transmission Unit Shows the MTU size, in bytes.
Router Duplicate Address Detection Transmits Shows the number of consecutive
duplicate address detection probes to transmit.
Router Advertisement NS Interval Shows the interval, in milliseconds, between router
advertisements for advertised neighbor solicitations.
Router Lifetime Interval Shows the router lifetime value of the interface in router
advertisements
Router Advertisement Reachable Time Shows the amount of time, in milliseconds, to
consider a neighbor reachable after neighbor discovery confirmation.
Router Advertisement Interval Shows the frequency, in seconds, that router
advertisements are sent.
Router Advertisement Managed Config Flag Shows whether the managed configuration
flag is set (enabled) for router advertisements on this interface.
Router Advertisement Other Config Flag Shows whether the other configuration flag is set
(enabled) for router advertisements on this interface.
Router Advertisement Suppress Flag Shows whether router advertisements are
suppressed (enabled) or sent (disabled).
To Next Page
Loading...
Need help?
General
