Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 348/970
None
Command Mode
Privileged Exec
6.17.1.18 clear port-security dynamic address
This command is used to clear the Dynamic MAC address by using the specified port
(interface <slot/port>) or mac address (address <mac-addr>).
Syntax
clear port-security dynamic {address <mac-addr> | interface <slot/port> }
<mac-addr> - mac address you want to remove.
<slot/port> - mac address learning on this interface will be removed.
Default Setting
None
Command Mode
Privileged Exec
6.17.1.19 clear ip arp-cache
This command causes all ARP entries of type dynamic to be removed from the ARP cache. If
the gateway keyword is specified, the dynamic entries of type gateway are purged as well. If
interface keyword is specified, he dymanic entries of that interface on the ARP cache Table are
purged.
Syntax
clear ip arp-cache [gateway | interface <slot/port>]
<slot/port> - Interface number.
To Next Page
Loading...
Need help?
General
