Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 446/970
SA - a type 4 ASBR summary LSA has changed
X - a type 5 or type 7 external LSA has changed
7.3.1.14 show ip ospf stub table
This command displays the OSPF stub table. The information will only be displayed if OSPF is
initialized on the switch.
Syntax
show ip ospf stub table
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Messages
Area ID Is a 32-bit identifier for the created stub area.
Type of Service Is the type of service associated with the stub metric. FASTPATH only
supports Normal TOS.
Metric Val The metric value is applied based on the TOS. It defaults to the least metric of the
type of service among the interfaces to other areas. The OSPF cost for a route is a
function of the metric value.
Metric Type Is the type of metric advertised as the default route.
Import Summary LSA Controls the import of summary LSAs into stub areas.
7.3.1.15 show ip ospf virtual-link
This command displays the OSPF Virtual Interface information for a specific area and
neighbor.
Syntax
To Next Page
Loading...
Need help?
General
