QUANTA LB4M - Port Security Configuration Commands; Port-Security

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 288/970
Syntax
tacacs timeout <timeout>
no tacacs timeout
<timeout> - The connection timeout value. Max timeout (Range: 1 to 30).
no - This command is used to reset the timeout value to the default value.
Default Setting
5
Command Mode
Global Config
This command is used to configure the TACACS+ connection timeout value.
Syntax
timeout <timeout>
<timeout> - The connection timeout value. Max timeout (Range: 1 to 30).
Default Setting
5
Command Mode
Tacacs Host Config
6.8.6 Port Security Configuration Commands
6.8.6.1 port-security
This command enables port locking at the system level (Global Config) or port level (Interface
Config).