Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 401/970
Default Setting
None
Command Mode
Global Config
6.19.2.7 ip access-group
This command attaches a specified access-control list to an interface.
Syntax
ip access-group <1- 199> in [<1-4294967295>]
<1- 199> The identifier of this ACL.
<1-4294967295> The sequence number of this ACL.
Default Setting
None
Command Mode
Global Config, Interface Config
6.20 IPv6 ACL Command
6.20.1 Show Commands
6.20.1.1 show ipv6 access-lists
This command displays an IPv6 access list and all of the rules that are defined for the IPv6
ACL. Use the [name] parameter to identify a specific IPv6 ACL to display.
Syntax
To Next Page
Loading...
Need help?
General
