EasyManua.ls Logo

QUANTA LB4M - Show Ip Igmp Groups

QUANTA LB4M
970 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 509/970
IGMP Admin Mode This field displays the administrative status of IGMP. This is a configured
value.
Interface Valid slot and port number separated by forward slashes.
Interface Mode This field indicates whether IGMP is enabled or disabled on the interface.
This is a configured value.
Protocol State This field indicates the current state of IGMP on this interface. Possible
values are Operational or Non-Operational.
8.2.1.2 show ip igmp groups
This command displays the registered multicast groups on the interface. If “detail” is specified
this command displays the registered multicast groups on the interface in detail.
Syntax
show ip igmp groups <slot/port> [detail]
<slot/port> - Valid slot and port number separated by forward slashes.
[detail] - Display details of subscribed multicast groups.
Default Setting
None
Command Mode
Privileged Exec
Display Message
IP Address This displays the IP address of the interface participating in the multicast group.
Subnet Mask This displays the subnet mask of the interface participating in the multicast
group.
Interface Mode This displays whether IGMP is enabled or disabled on this interface.
The following fields are not displayed if the interface is not enabled:
Querier Status This displays whether the interface has IGMP in Querier mode or
Non-Querier mode.
Groups This displays the list of multicast groups that are registered on this interface.
If detail is specified, the following fields are displayed:
Multicast IP Address This displays the IP Address of the registered multicast group on this
interface.
Last Reporter This displays the IP Address of the source of the last membership report
received for the specified multicast group address on this interface.
Up Time This displays the time elapsed since the entry was created for the specified
multicast group address on this interface.
Expiry Time This displays the amount of time remaining to remove this entry before it is
aged out.

Table of Contents

Related product manuals