QUANTA LB4M - Ipv6 Dhcp Pool; Ipv6 Dhcp Relay-Agent-Info-Remote-ID-Subopt

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 614/970
Use this command to configure a number to represent the DHCPv6 Relay Agent Information
Option. The DHCPv6 Relay Agent Information Option allows for various sub-options to be
attached to messages that are being relayed by the local router to a relay server. The relay
server may in turn use this information in determining an address to assign to a DHCPv6 client.
Syntax
ipv6 dhcp relay-agent-info-opt <32-65535>
no ipv6 dhcp relay-agent-info-opt
no - This command return the vaule to default.
Default Setting
32
Command Mode
Global Config
9.6.2.5 ipv6 dhcp relay-agent-info-remote-id-subopt
Use this command to configure a number to represent the DHCPv6 the “remote-id” suboption.
Syntax
ipv6 dhcp relay-agent-info-remote-id-subopt <1-65535>
no ipv6 dhcp relay-agent-info-remote-id-subopt
no - This command return the vaule to default.
Default Setting
1
Command Mode
Global Config
9.6.2.6 ipv6 dhcp pool