Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 964/970
Protocol State - The operational state of the PIM-DM protocol on this interface.
Hello Interval (secs)- The frequency at which PIM hello messages are transmitted on the
selected interface.
IP Address - The IP address of the selected interface.
Neighbor Count - The number of PIM neighbors on the selected interface.
Designated Router - The designated router on the selected PIM interface. For point-
to-point interfaces, this will be 0.0.0.0.
Neighbor IP - The IP address of the PIM neighbor for which this entry contains
information.
Uptime - The time since this PIM neighbor (last) became a neighbor of the local router.
Expiry Time - The minimum time remaining before this PIM neighbor will be aged out.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.
11.2.7.6 Managing PIM-SM Protocol
11.2.7.6.1. Configuring PIM-SM Global Configuration Page
Configurable Data
Admin Mode - Select enable or disable from the pulldown menu to set the administrative
status of PIM-SM in the router. You must enable IGMP before enabling PIM-SM. The
default is disabled.
To Next Page
Loading...