QUANTA LB4M - Port Mirror; Show Port-Monitor Session

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 169/970
Default Setting
priority queue
0 1
1 0
2 0
3 1
4 2
5 2
6 3
7 3
Command Mode
Interface Config
6.2.13 Port Mirror
6.2.13.1 show port-monitor session
This command displays the Port monitoring information for the specified session.
Syntax
show port-monitor session <Session Number>
< Session Number > - session number.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Session ID: indicates the session ID.
Admin Mode: indicates whether the Port Monitoring feature is enabled or disabled. The
possible values are enabled and disabled.
Dest.Port: is the slot/port that is configured as the probe port. If this value has not been
configured, 'Not Configured' will be displayed.