Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 541/970
Syntax
ip pimsm message-interval <10 - 3600>
no ip pimsm message-interval
<10 - 3600> - This is time interval in seconds.
no - This command is used to reset the global join/prune interval for PIM-SM router to the
default value.
Default Setting
60
Command Mode
Global Config
8.5.2.3 ip pimsm register-rate-limit
This command is used to configure the Threshold rate for the RP router to switch to the
shortest path. The rate is specified in Kilobytes per second. The possible values are 0 to 2000.
Syntax
ip pimsm register-rate-limit <0 - 2000>
no ip pimsm register-rate-limit
<0 - 2000> - This is time interval in seconds.
no - This command is used to reset the Threshold rate for the RP router to switch to the
shortest path to the default value.
Default Setting
50
Command Mode
Global Config
To Next Page
Loading...
Need help?
General
