QUANTA LB4M - Area Stub; Area Stub Summarylsa

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 454/970
7.3.2.13 area stub
This command creates a stub area for the specified area ID. A stub area is characterized by
the fact that AS External LSAs are not propagated into the area. Removing AS External LSAs
and Summary LSAs can significantly reduce the link state database of routers within the stub
area.
Syntax
area <areaid> stub
no area <areaid> stub
<areaid> - Area ID.
<no> - This command deletes a stub area for the specified area ID.
Default Setting
None
Command Mode
Router OSPF Config
7.3.2.14 area stub summarylsa
This command configures the Summary LSA mode for the stub area identified by <areaid>.
The Summary LSA mode is configured as enabled.
Syntax
area <areaid> stub summarylsa
no area <areaid> stub summarylsa
<areaid> - Area ID.
<no> - This command configures the default Summary LSA mode for the specified stub
area.
Default Setting
Disabled