QUANTA LB4M - Ipv6 Nd Ra-Interval; Ipv6 Nd Ra-Lifetime

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 569/970
interface.
Syntax
ipv6 nd other-config-flag
no ipv6 nd other-config-flag
no – This command resets the “other stateful configuration” flag back to its default value in
router advertisements sent from the interface.
Default Setting
False
Command Mode
Interface Config
9.3.2.11 ipv6 nd ra-interval
This command sets the transmission interval between router advertisements.
Syntax
ipv6 nd ra-interval <4 – 1800 >
no ipv6 nd ra-interval
no – This command sets router advertisement interval to the default.
Default Setting
600
Command Mode
Interface Config
9.3.2.12 ipv6 nd ra-lifetime
This command sets the value, in seconds, that is placed in the Router Lifetime field of the
router advertisements sent from the interface. The <lifetime> value must be zero, or it must be