Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 94/970
Syntax
vlan name <vlanid> <newname>
no vlan name <vlanid>
<vlanid> - VLAN ID (Range: 1 –3965).
<newname> - Configure a new VLAN Name (up to 16 alphanumeric characters).
no - This command sets the name of a VLAN to a blank string. The VLAN ID is a valid
VLAN identification number. ID range is 1-3965.
Default Setting
The name for VLAN ID 1 is always Default. The name for other VLANs is defaulted to a blank
string.
Command Mode
VLAN database
6.2.3.10 vlan association mac
This command associates a MAC address to a VLAN.
Syntax
vlan association mac <macaddr> <vlanid>
no vlan association mac <macaddr>
<macaddr> - enter a MAC Address to display the table entry for the requested MAC
address.
<vlandid> - VLAN identification number. ID range is 1-3965.
no - This command removes the association of a MAC address to a VLAN.
Default Setting
None
Command Mode
VLAN database
6.2.3.11 vlan association subnet
To Next Page
Loading...
Need help?
General
