QUANTA LB4M User Manual

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 218/970
6.3.10.3 set sFlow maximum header size
The user can go to the CLI Interface Configuration Mode to set maximum header size, use the
sflow maximum-header <32-256> interface configuration command. Use the no sflow
maximum-header return to default value 128
Syntax
sflow maximum-header <32-256>
no sflow maximum-header
Default Setting
128
Command Mode
Interface Configure
6.3.10.4 set sFlow maximum datagram size
The user can go to the CLI Interface Configuration Mode to set maximum datagram size, use
the sflow maximum-datagram <500-1470> interface configuration command. Use the no
sflow maximum-datagram return to default value 1400.
Syntax
sflow maximum-datagram <500-1470>
no sflow maximum-datagram
Default Setting
1400
Command Mode
Interface Configure
6.3.10.5 set sFlow collector address
The user can go to the CLI Interface Configuration Mode to set collector ip address, use the
sflow collector-address <ip-address> interface configuration command. Use the no sflow
collector-address to clear collector ip address.
Syntax

QUANTA LB4M Specifications

General

Brand	QUANTA
Model	LB4M
Category	Switch
Language	English