Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 469/970
7.3.2.38 timers spf
This command configures the SPF delay time and hold time. The valid range for both
parameters is 0-65535 seconds.
Syntax
timers spf <0-65535> <0-65535>
Default Setting
Delay-time—5
Hold-time—10
Command Mode
Router OSPF Config.
7.4 Bootp/DHCP Relay Commands
7.4.1 show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
Syntax
show bootpdhcprelay
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
Maximum Hop Count: Is the maximum allowable relay agent hops.
Minimum Wait Time (Seconds) Is the minimum wait time.
Admin Mode Represents whether relaying of requests is enabled or disabled.
Server IP Address Is the IP Address for the BootP/DHCP Relay server.
Circuit Id Option Mode Is the DHCP circuit Id option which may be enabled or disabled.
Requests Received Is the number of requests received.
Requests Relayed Is the number of requests relayed.
Packets Discarded Is the number of packets discarded.
To Next Page
Loading...
Need help?
General
