Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 151/970
6.2.10.1 show port-channel
This command displays the static capability of all port-channels (LAGs) on the device as well
as a summary of individual port-channels.
Syntax
show port-channel
Default Setting
None
Command Mode
Privileged Exec
Display Message
For each port-channel the following information is displayed:
Logical Interface: The field displays logical slot and the logical port.
Port-Channel Name: This field displays the name of the port-channel.
Link State: This field indicates whether the link is up or down.
Mbr Ports: This field lists the ports that are members of this port-channel, in slot/port
notation.
Active Ports: This field lists the ports that are actively participating in this port-channel.
This command displays an overview of all port-channels (LAGs) on the switch.
Syntax
show port-channel {<logical slot/port> | all}
<logical slot/port> - Port-Channel Interface number.
all – all Port-Channel interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
To Next Page
Loading...
Need help?
General
