QUANTA LB4M User Manual

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 219/970
sflow collector-address <ip-address>
no sflow collector-address
Default Setting
none
Command Mode
Interface Configure
6.3.10.6 set sFlow collector port
The user can go to the CLI Interface Configuration Mode to set collector UDP port, use the
sflow collector-port <1025-65535> interface configuration command. Use the no sflow
collector-port return to default UDP port 6343.
Syntax
sflow collector- port <1025-65535>
no sflow collector-port
Default Setting
6343
Command Mode
Interface Configure
6.3.10.7 set sFlow interval
The user can go to the CLI Interface Configuration Mode to set sampling interval, use the
sflow interval <20-120> interface configuration command. Use the no sflow interval return to
default value zero.
Syntax
sflow interval <20-120>
no sflow interval
Default Setting
0

QUANTA LB4M Specifications

General

Brand	QUANTA
Model	LB4M
Category	Switch
Language	English