Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 472/970
Default Setting
None
Command Mode
Global Config
7.5 Domain Name Server Relay Commands
7.5.1 Show Commands
7.5.1.1 show hosts
This command displays the static host name-to-address mapping table.
Syntax
show hosts
Default Setting
None
Command Mode
Privileged Exec
Display Message
Domain Name List: Domain Name.
IP Address: IP address of the Host.
7.5.1.2 show dns
This command displays the configuration of the DNS server.
Syntax
To Next Page
Loading...
Need help?
General
