Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 571/970
This command suppresses router advertisement transmission on an interface.
Syntax
ipv6 nd suppress-ra
no ipv6 nd suppress-ra
no –This command enables router transmission on an interface
Default Setting
Disabled
Command Mode
Interface Config
9.3.2.15 ipv6 nd prefix
This command sets the IPv6 prefixes to include in the router advertisement. The first optional
parameter is the valid lifetime of the router, in seconds. You can specify a value or indicate that
the lifetime value is infinite. The second optional parameter is the preferred lifetime of the
router.
Syntax
ipv6 nd prefix <prefix/prefix_length> [{<0-4294967295> | infinite}
{<0-4294967295> | infinite}] [no-autoconfig off-link]
no ipv6 nd prefix
no – This command sets prefix configuration to default values.
Default Setting
Valid-lifetime – 604800
Preferred-lifetime – 2592000
Autoconfig – enabled
On-link - enabled
Command Mode
Interface Config
To Next Page
Loading...
Need help?
General
