Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 64/970
Switch 1 Module x, Found 4 Ports SFP Plus 10G Daughter Board
Switch 1 10G’s Module x (The xth 10-Giga Module daughter board of switch 1).
Switch 1 Interface = y...................... SFP+(The yth 10-Giga information of switch 1).
10 Gigabit Ethernet Compliance Codes: Transceiver’s compliance codes.
Vendor Name: The SFP transceiver vendor name shall be the full name of the corporation,
a commonly accepted abbreviation of the name of the corporation, the SCSI company code
for the corporation, or the stock exchange code for the corporation.
Vendor Part Number: Part number provided by SFP transceiver vendor.
Vendor Serial Number: Serial number provided by vendor.
Vendor Revision Number: Revision level for part number provided by vendor.
Vendor Manufacturing Date: The vendor’s manufacturing date.
Switch 1 Module x, Found 4 Ports SFP Plus 10G Daughter Board
Switch 1 10G’s Module x (The xth 10-Giga Module daughter board of switch 1).
Switch 1 Interface = y...................... SFP+(The yth 10-Giga information of switch 1).
10 Gigabit Ethernet Compliance Codes: Transceiver’s compliance codes.
Vendor Name: The SFP transceiver vendor name shall be the full name of the corporation,
a commonly accepted abbreviation of the name of the corporation, the SCSI company code
for the corporation, or the stock exchange code for the corporation.
Vendor Part Number: Part number provided by SFP transceiver vendor.
Vendor Serial Number: Serial number provided by vendor.
Vendor Revision Number: Revision level for part number provided by vendor.
Vendor Manufacturing Date: The vendor’s manufacturing date.
Now temperature: The temperature of switch x.
Fan 1 Status: Status of Fan1. It could be active or inactive.
Fan 2 Status: Status of Fan2. It could be active or inactive.
Additional Packages: This displays the additional packages that are incorporated into this
system.
6.1.8 show version
This command displays inventory information for the switch.
Syntax