Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 381/970
Syntax
conform-color <class-map-name>
<class-map-name> - Name of an existing Diffserv class map, where different ones must
be used for the conform colors.
Command Mode
Policy-Class-Map Config
6.18.3.6 mark cos
This command marks all packets for the associated traffic stream with the specified class of
service value in the priority field of the 802.1p header. If the packet does not already contain
this header, one is inserted. The CoS value is an integer from 0 to 7.
Syntax
mark cos <0-7>
<0-7> - The range of COS value is 0 to 7.
Command Mode
Policy-Class-Map Config
Policy Type
In
6.18.3.7 class
This command creates an instance of a class definition within the specified policy for the
purpose of defining treatment of the traffic class through subsequent policy attribute
statements.
To Next Page
Loading...
Need help?
General
