Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 184/970
This command specifies the maximum number of remote connection sessions that can be
established. A value of 0 indicates that no remote connection can be established. The range is
0 to 5.
Syntax
maxsessions <0-5>
no maxsessions
<0-5> - max sessions (Range: 0 - 5).
no -
This command sets the maximum value to be 5.
Default Setting
5
Command Mode
Telnet Config
6.3.3.8 server enable
This command enables/disables telnet server. If telnet server is enabled, all telnet sessions
can be established until there are no more sessions available. If telnet server is disabled, all
telnet sessions are closed.
Syntax
server enable
no server enable
no - This command disables telnet server. If telnet server is disabled, all telnet sessions
are droped.
Default Setting
Enabled
Command Mode
Telnet Config
6.3.3.9 sessions
To Next Page
Loading...
Need help?
General
