Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 308/970
6.12 LLDP (Link Layer Discovery Protocol) Commands
6.12.1 Show Commands
6.12.1.1 show lldp
This command uses to display a summary of the current LLDP configuration.
Syntax
show lldp
Default Setting
None
Command Mode
Privileged Exec
Display Message
Transmit Interval: Shows how frequently the system transmits local data LLDPDUs, in
seconds.
Transmit Hold Multiplier: Shows the multiplier on the transmit interval that sets the TTL in
local data LLDPDUs.
Re-initialization Delay: Shows the delay before re-initialization, in seconds.
Notification Interval: Shows how frequently the system sends remote data change
notifications, in seconds.
6.12.1.2 show lldp interface
This command uses to display a summary of the current LLDP configuration for a specific
interface or for all interfaces.
Syntax
To Next Page
Loading...
Need help?
General
