Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 450/970
This command configures the monetary default cost for the stub area.
Syntax
area <areaid> default-cost <1-16777215>
<1-16777215> - The default cost value. The range is 1 to 16777215.
Default Setting
None
Command Mode
Router OSPF Config
7.3.2.6 area nssa
This command configures the specified areaid to function as an NSSA.
Syntax
area <areaid> nssa
no area <areaid> nssa
<areaid> - Area ID.
<no> - This command disables nssa from the specified area id.
Default Setting
None
Command Mode
Router OSPF Config
7.3.2.7 area nssa default-info-originate
This command configures the metric value and type for the default route advertised into the
NSSA. The optional metric parameter specifies the metric of the default route and is to be in a
range of 1-16777214. If no metric is specified, the default value is ****. The metric type can be
comparable (nssa-external 1) or non-comparable (nssa-external 2).
To Next Page
Loading...
Need help?
General
