QUANTA LB4M User Manual

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 440/970
LSA Ack Interval A number representing the OSPF LSA Acknowledgement Interval for the
specified interface.
IfTransit Delay Interval A number representing the OSPF Transit Delay for the specified
interface. This is a configured value.
Authentication Type The OSPF Authentication Type for the specified interface are: none,
simple, and encrypt. This is a configured value.
The information below will only be displayed if OSPF is enabled.
OSPF Interface Type: Broadcast LANs, such as Ethernet and IEEE 802.5, take the value
broadcast. The OSPF Interface Type will be 'broadcast'.
State: The OSPF Interface States are: down, loopback, waiting, point-to-point, designated
router, and backup designated router.
Designated Router: The router ID representing the designated router.
Backup Designated Router: The router ID representing the backup designated router.
Number of Link Events: The number of link events.
Metric Cost: The cost of the OSPF interface.
7.3.1.8 show ip ospf interface brief
This command displays brief information for the IFO object or virtual interface tables.
Syntax
show ip ospf interface brief
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Messages
Interface Valid slot and port number separated by forward slashes.
Admin Mode States whether OSPF is enabled or disabled on a router interface. This is a
configured value.
Area ID Represents the OSPF Area Id for the specified interface. This is a configured value.
Router Priority A number representing the OSPF Priority for the specified interface. This is a
configured value.
Hello Interval A number representing the OSPF Hello Interval for the specified interface.
This is a configured value.
Dead Interval A number representing the OSPF Dead Interval for the specified interface.
This is a configured value.
Retrax Interval A number representing the OSPF Retransmit Interval for the specified
interface. This is a configured value.
Retrax Delay A number representing the OSPF Transit Delay for the specified interface. This
is a configured value.

QUANTA LB4M Specifications

General

Brand	QUANTA
Model	LB4M
Category	Switch
Language	English