QUANTA LB4M User Manual

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 279/970
Default Setting
disabled
Command Mode
Interface Config
6.8.3.14 dot1x guest-vlan
This command configures the Guest VLAN to be assigned to supplicants that have failed
authentication.
Syntax
dot1x guest-vlan supplicant
no dot1x guest-vlan supplicant
no - This command disables the Guest VLAN supplicant on the switch.
Default Setting
disabled
Command Mode
Global Config
6.8.3.15 dot1x timeout guest-vlan-period
Use this command to set the value, in seconds, of the timer used by the authenticator state
machine on this port to timeout the authentication server.
Syntax
dot1x timeout guest-vlan-period <seconds>
no dot1x timeout quest-vlan-period

QUANTA LB4M Specifications

General

Brand	QUANTA
Model	LB4M
Category	Switch
Language	English