Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 560/970
MAC Address used by Routing VLANs: Shows the MAC address.
The rest of the output for this command is displayed in a table with the following column
headings:
VLAN ID: Shows the VLAN ID of a configured VLAN.
Logical Interface: Shows the interface in slot/port format that is associated with the VLAN
ID.
IPv6 Address/Prefix Length: Shows the IPv6 prefix and prefix length associated with the
VLAN ID.
9.3.1.8 show ipv6 traffic
This command displays traffic and statistics for IPv6 and ICMPv6. Specify a logical, loopback,
or tunnel interface to view information about traffic on a specific interface. If you do not specify
an interface, the command displays information about traffic on all interfaces.
Syntax
show ipv6 traffic [{<slot/port> | loopback <loopback-id> | tunnel <tunnel-id>}]
Default Setting
None
Command Mode
Privileged Exec
Display Message
Total Datagrams Received: Total number of input datagrams received by the interface,
including those received in error.
Received Datagrams Locally Delivered: Total number of datagrams successfully delivered
to IPv6 user-protocols (including ICMP). This counter increments at the interface to which
these datagrams were addressed, which might not necessarily be the input interface for
some of the datagrams.
Received Datagrams Discarded Due To Header Errors: Number of input datagrams
discarded due to errors in their IPv6 headers, including version number mismatch, other
format errors, hop count exceeded, errors discovered in processing their IPv6 options, etc.
Received Datagrams Discarded Due To MTU: Number of input datagrams that could not
be forwarded because their size exceeded the link MTU of outgoing interface.
Received Datagrams Discarded Due To No Route: Number of input datagrams discarded
because no route could be found to transmit them to their destination.
Received Datagrams With Unknown Protocol: Number of locally-addressed datagrams
received successfully but discarded because of an unknown or unsupported protocol. This
counter increments at the interface to which these datagrams were addressed, which might
not be necessarily the input interface for some of the datagrams
Received Datagrams Discarded Due To Invalid Address: Number of input datagrams
discarded because the IPv6 address in their IPv6 header's destination field was not a valid
address to be received at this entity. This count includes invalid addresses (for example, ::0)
To Next Page
Loading...
Need help?
General
