Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 591/970
<1-16777215> - The metric of the default route. The range is 1 to 16777215.
comparable - It's NSSA-External 1.
non-comparable - It's NSSA-External 2.
no - This command disables the default route advertised into the NSSA.
Default Setting
None
Command Mode
Router OSPFv3 Config
9.4.2.15 area nssa no-redistribute (OSPFv3)
This command configures the NSSA ABR so that learned external routes will not be
redistributed to the NSSA.
Syntax
area <areaid> nssa no-redistribute
no area <areaid> nssa no-redistribute
<areaid> - Area ID.
no - This command disables the NSSA ABR so that learned external routes are
redistributed to the NSSA.
Default Setting
None
Command Mode
Router OSPFv3 Config
9.4.2.16 area nssa no-summary (OSPFv3)
This command configures the NSSA so that summary LSAs are not advertised into the NSSA
Syntax