Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 758/970
Submit - Update the switch with the values on this screen. If you want the switch to retain
the new values across a power cycle, you must perform a save.
11.2.2.19 Managing Port Security
11.2.2.19.1. Configuring Port Security Administration Mode Page
Configurable Data
Allow Port Security - Used to enable or disable the Port Security feature.
Command Buttons
Submit - Applies the new configuration and causes the changes to take effect. These
changes will not be retained across a power cycle unless a save configuration is
performed.
11.2.2.19.2. Configuring Port Security Interface Page
Selection Criteria
To Next Page
Loading...
Need help?
General
